Activity Stream

Now I have been watching this post and have been some what put off posting. Now if this was an oil debate about what oil you should put in your...

Ha ha pmsl Sent from my iPhone using Tapatalk

Lidl Stiftung & Co. KG (German pronunciation: ; UK: /?l?d?l/ LID-?l) is a German international discount supermarket chain Probably the only way for...

Seems like the Hadrian's Wall Preservation Society needs more funding --

Just been to Lidl and found they are selling Union flag doormats - really? you want to welcome people into your home by first cleaning their feet on...

How about Castrol LM grease other greases are available; Comma, Fuchs, Granville, etc. Try Amazon, Ebay or your local motor factors. Try here :...

:encouragement: thanks again !

Yep, I was Lucky. But ever since then I do get a nagging thought in my head every now and again!

HDI for us, correct.

probably this

Not really Paul, that's like saying Carlisle isn't in Englnd because when the doomsday book was compiled Carlisle was in Scotland but obviously now...

ill have to check at a later date im stocking up on parts before I get the bike stripped but according to that diagram of my bike theres 4 pin...

I am now very slowly losing the will to live. Connected the new battery charger bit it couldn't detect the battery. Some idiot had connected the...

If you look at the pcb does it have an additional 3 pin socket? If so and using an ohm meter does that connect to the 4 pin connector used for the...

I think my 2006 low has only the one bulb doing job of both number plate and brake light as ive seen a digram online and the one you have posted Andy...

Superb many thanks for the explanation roger

Crikey! It's good that you did not end up with catastrophic damage.

Yes you are correct with the 2006 low model tail light Andy, im just missing ground on the newer iron rear plate holder, thanks for your patience and...

So you have a 2006 Low? That should have the rear light as I have been explaining. On the 2007 pcb there is an additional 3 pin connector. I...

Years ago I changed Cams, Lifters and Pushrods etc. The new Pushrods were SE Adjustable. Driving home from an M.O.T. one of the nuts came loose and...

Okay I see now the license plate is on the side so that I assume will have the tail light.

the iron rear tail light I have is definitely 2 wires and the part I need after using the search tool you provided is 73152-96BK ...

that's great Andy ill check again maybe because the wire is cut so short looks like 2 wire

The rear lamp on the low is not a 2 wire plug but 4 wire with 3 pins used for tail, brake and ground. The plug goes to a socket on a pcb that sits...

Hi Vince, we are fully optimistic and are proceeding with this. We hope to have latest ferry deals and will update in due course.

Great info as ever, Alex. I have never had an adjustable Push Rod locknut work loose and the adjustment go out of whack, but it is another...

https://www.hogparts.co.uk/products/mini-wedge-led-bulb-part-104056?_pos=8&_sid=6749e40f5&_ss=r also looking for wedge bulb led replacements...