![]() | |
| |||||||
| Custom Zone Custom Bikes, Chops, Builds and Winter Projects |
![]() |
| | LinkBack | Thread Tools | Display Modes |
|
#1
| ||||
| ||||
| As it was my idea i suppose i better post! Hi all, well here we are a custom zone on the riders club site, top stuff Anyway heres the latest project from me, started life as a mates 883 100th special edition sporty flattracker, basically taken the motor out and started from scratch again, Spec as follows Motor is now a 1200 (was done before i started) 230 section tyre on a american wire 15x7 80 spoke wheel custom made frame by CCD single down tube 38 degrees in the headstock 5 in the trees 2" stretch in the backbone down 1" in the downtube Drop seat frame softail Stock length billet forks with 5 degree billet wide glide trees and a blind top yoke 80 spoke 21" wheel with a skinny tyre Performance machine forwards BDL billet hand controls custom made battery box, oil bag, seat pan etc rear fender cut and shaped tank cut and shaped heres the pictures, any questions etc shout ![]() ![]() ![]() ![]() ![]() |
|
#2
| ||||
| ||||
| Re: As it was my idea i suppose i better post! Nice It is good to see the sportster motor being used in a custom.
__________________ custom biker 01159134002 www.stores.ebay.co.uk/trikersues-chopper-shop sueingram@custombiker.org www.custombiker.org |
|
#3
| ||||
| ||||
| Re: As it was my idea i suppose i better post! Looking good mate ![]() |
|
#4
| ||||
| ||||
| Re: As it was my idea i suppose i better post! well sorted neil ,where are u going to position the batery ,is that one of the oil tanks with the cut out for battery ,or are u gonni hang it off the side?
__________________ Imagination is more important than Knowledge.knowledge is limited. Imagination encircles the world. |
|
#5
| ||||
| ||||
| Re: As it was my idea i suppose i better post! Dan, Battery is mounted under the frame, se the fifth picture, as the seat rail drops so heavily there is nowhere else to mount it. Oil tank is custom made just over 3 quarts cheers Neil |
|
#6
| ||||
| ||||
| Re: As it was my idea i suppose i better post! seen that m8, i take it its a gel battery ,to lay it down flat, what size of battery dimension wise will cope and give u correct output
__________________ Imagination is more important than Knowledge.knowledge is limited. Imagination encircles the world. |
|
#7
| ||||
| ||||
| Re: As it was my idea i suppose i better post! Dan, Its actually a stock softail battery, its gel already, i believe the sportster battery is the same as well, or at least mine is. as the battery i bought is exactly the same as the one i already had! |
|
#8
| ||||
| ||||
| Re: As it was my idea i suppose i better post! Quote:
![]()
__________________ Imagination is more important than Knowledge.knowledge is limited. Imagination encircles the world. |
|
#9
| ||||
| ||||
| Re: As it was my idea i suppose i better post! well the frame and a couple of ancillarys went off to paint today, should be back by the end of the week and then its time to start putting it back together, electrics are gonna take a while as i am using the stock loom but heavily modifying it, seems a waste not to use it! cant wait to see the frame with colour on it, will post pics when it comes back |