I have just completed my
Gear Driven Cam upgrade: Andrews TW37g Cams, Feuling Cam Plate and Oil Pump, H-D Lifters, S.E. Adjustable Pushrods and S.E. Air Cleaner. I put back the original Keihin CV Carb. (instead of my Qwiksilver) but fitted a Dynojet Thunderslide to it. I have Krome Werks AR III Exhausts so it should be free breathing in and out.
The problem is, it is running rough ticking over. I put a
48 Idle Jet and a
195 Main Jet as a starting point but would like to know if anyone has any recommendations re: jetting for this setup or something similar? Any help would be appreciated as it could save me a lot of fiddling/tweaking/time.
Thanks...Pat.
