Thread: Bearing Swarf
View Single Post
  #3  
Old 24-06-2009, 11:02 PM
RobK's Avatar
RobK RobK is offline
Club Member
 
Join Date: May 2006
Posts: 553
Re: Bearing Swarf

Quote:
Originally Posted by devon.john View Post
i dont think bits that size would come through the drain hole on a twin came
so it looks likely to be the old bits from before
if they were from the bike you would have known by the noise and vibes!!!
good luck

john
Cheers John,

the pictures are a bit deceptive, the parts are fairly small.

I pulled the outer primary cover off and there was no other scrap bits inside at all, nothing, it all looked ok...

No different vibes than normal riding home but the primary did seem noisier than usual, probably just the heat though.

Cheers,
Rob.
__________________
Assistant Rep - Region 19
Reply With Quote