| Re: Valve stem oil seals....
You are going to have to remove the heads.
A few years back the Factory had an issue with Stem Seals on the 05`s
As we were doing literally dozens we did some experimenting trying to do the job as Spinlondon suggests using commercially available tools.
It didn`t work well. The rear head is almost impossible to do with the frame in the way.
By the time you have p1ssed around with it, you might as well have taken it off, its only four fasteners.
__________________ 
Last edited by Phil; 06-07-2009 at 02:06 AM.
|