![]() | |
|
#1
| ||||
| ||||
| 'White wire mod'?
....just read about this but can't find out exactly what it is or does.....anybody?
__________________ R I P BUELL FTF |
|
#2
| ||||
| ||||
| Re: 'White wire mod'?
Loads to read on google Chris: buell White wire mod - Google Search |
|
#3
| ||||
| ||||
| Re: 'White wire mod'?
ive heard that it works on the pre 2006 models. i put a jardine silencer and a racing ecu on mine and i lost a lot of the midrange torgue but once it gets past 4000 rpm it goes like hot shit off a shovel
|
|
#5
| ||||
| ||||
| Re: 'White wire mod'? Quote:
I just googled and the top item listed was a link back to your very words! I think that is called a loop!!! Doh...
__________________ Graham Harley owner since 1974, currently: 1990 FLHS/2008 V107T, 2003 FXDXT, 2007 XB12R, MG ZT 260SE. |
|
#6
| |||
| |||
| Re: 'White wire mod'?
Ecmspy does indeed have the option to turn on the white wire mod. Cutting no longer required ;)
|
|
#7
| ||||
| ||||
| Re: 'White wire mod'?
have a look on UKBEG the whole tech bit is explained there . ![]() bassicaly it gets rid of an emision flat spot to get through the emision tests. you only need to remove the pin from the conector then tape it up , DON'T cut the wire. the ECM spy can over come this too. Last edited by nutah; 20-07-2008 at 10:28 PM. |
![]() |
| Thread Tools | |
| Display Modes | |
| |