this winters project

[Kiwi]

hopefully this year it will get finished

before picture is thumbnail above taken approx 12 years ago

[Tibbs Art]

Look forward to it mate.
If ya need any airbrushing done way down the line I'd be keen to help.
Tibbs

[dantheman]

noo id luv tae get me fidgety fingers in among that ,keep us posted kiwi, and good luck m8,

[Kiwi]

have rebuilt the kickstart are replace the aftermarket taiwanese kicker shaft (see pic) that is weakened at one end with a 360 degree grove for the clamp bolt with a jims unit, which only has a small notch to allow the clamp bolt through, I've had two of these cheap taiwanese shafts break. both in the same place, the Jims unit should be able to do the business

alose replaced the horrible spring retainer bolt the one with cheap chrome that cracks and rusts with a button head stainless screw that is a load cleaner and won't rust

[dantheman]

thats the game kiwi, more pics ,m8, lets keep this section alive ,for us fidgets

[Kiwi]

have fitted the 3 degree offset bearing cups to kick the front end out a bit further (about an inch)

piece of piss to fit and frame remains standard so it can always be put back to original

[dantheman]

noo a remember ma wiring looking like that, good luck m8, and that wee kick out at the front ,will look sweet

[Kiwi]

the wiring is hidden by the tank and it all works best to leave it alone

[dantheman]

Originally Posted by Kiwi

the wiring is hidden by the tank and it all works best to leave it alone

ig need to tidy it m8, hat would drive me nuts

[Kiwi]

latest pic