![]() | |
| |||||||
Evo Sportsters
|
![]() |
| | LinkBack | Thread Tools | Display Modes |
|
#1
| |||
| |||
| Good US source for parts reqd
I don't like windshields but I'm about to start a job that will require a 20 mile each way motorway trip every day. The genuine Harley, quick release screen looks pretty good (that way I can take it off easily after work) but they cost an absolute fortune in the UK. Even Guernsey Harley charge £300. I've seen them listed for less than $300 in the states but finding somewhere that ships to the UK is proving tricky. Any recommendations? |
|
#2
| ||||
| ||||
| Re: Good US source for parts reqd
I've had good experience with Dennis Kirk recently. www.denniskirk.com Ordered on a Friday, received Wednesday. Only slight downside - they wanted a fax or scan of my CC (for the first order only) |
|
#3
| ||||
| ||||
| Re: Good US source for parts reqd
This one on ebay might fit your needs DetachableScreen Sportster/Dyna Item number: 8059448625 dave
__________________ A common mistake that people make when trying to design something completely foolproof was to underestimate the ingenuity of complete fools |
|
#4
| ||||
| ||||
| Re: Good US source for parts reqd
I have had excellent service from www.jpcycles.com If you want to know any little thing visit their on site forum and leave a message for Steve Franta, reall nice guy
__________________ ![]() Harley Davidson::::: The most efficient way to turn gasoline into noise without the side effect of creating horsepower. |
|
#5
| |||
| |||
| Re: Good US source for parts reqd
yes jpcycles are good
|
|
#6
| |||
| |||
| Re: Good US source for parts reqd
I saw a post in the Virtual Rally section recommending M&M. I had a look and they were selling a new, genuine HD quick release screen for about half what they are from Guernsey Harley. Even with postage and possible customs it worked out much less than I'd pay in the UK. Assuming it turns up, I've got a bargain. (not that I consider paying nearly £200 for a bit of perspex that much of a bargain!) |
|
#7
| ||||
| ||||
| Re: Good US source for parts reqd Quote:
__________________ Folkie 2005 Vivid Black XL883C N3 Cams, Dragtron II a/c, V&H Double Barrels with Smartpartz baffles; jetting: 45, imn 3 turns, 170; Öhlins HD 745s, -1" Progressive fork springs with Intiminators. |
|
#8
| ||||
| ||||
| Re: Good US source for parts reqd
I,ve used M&M no problems with there service will use them again
__________________ ![]() "You bled with Wallace," now bleed with me.The Bruce. Blàr Allt a' Bhonnaich.1314. |
|
#9
| ||||
| ||||
| Re: Good US source for parts reqd |
|
#10
| ||||
| ||||
| Re: Good US source for parts reqd Quote:
I like J&P's site where they have a huge range, and it's easy to navigate; you can even specify what your bike is and filter down what's shown to just include stuff that's relevant.
__________________ Folkie 2005 Vivid Black XL883C N3 Cams, Dragtron II a/c, V&H Double Barrels with Smartpartz baffles; jetting: 45, imn 3 turns, 170; Öhlins HD 745s, -1" Progressive fork springs with Intiminators. |
![]() |
| Thread Tools | |
| Display Modes | |
| |