Anyone got a spare one of these.....

[Tim]

[Hobbit]

the whole rear fender or the mising bolt ?

[SJC69]

.......Or the plastic chrome button?

If so they are Part Number 762 don't let the parts Johnny try to tell you it is not long enough for a part number just get them to punch it into the computer.
They are a chrome plastic cap to fit in the seat screw holes, they cost £4.39 here, for a plastic cap! So are $4.39 in the US, they are light and can go in an envelope, and guess what they are actually made in the US too!

[BaZa ®]

Or a bit of carpet?

[Tim]

Originally Posted by SJC69

.......Or the plastic chrome button?

..........10 out of 10..........

[SJC69]

Some models with a detachable pillion pad have one fitted into the base of the pad, so you can take it out & put it in the screw hole when not running with the pad.
You might be lucky and find one that way, Baza should have one!

[scooter333]

I need the boss so I can switch between solo and pillion, any one got a part number, its a sod to get your arm up and switch it out every time.

[SJC69]

The threaded insert and clip, RH side of the picture is Part No 59768-97 FENDER/SEAT NUT KIT £2-07

To fit you put a cable tie through it and then use this to guide it into place.
A long tie is best, you just push it through, you don't need to zip it up, the square latch section just needs to be big enough not to go through the insert.

[Tim]

Originally Posted by SJC69

.......Or the plastic chrome button?

If so they are Part Number 762 don't let the parts Johnny try to tell you it is not long enough for a part number just get them to punch it into the computer.
They are a chrome plastic cap to fit in the seat screw holes, they cost £4.39 here, for a plastic cap! So are $4.39 in the US, they are light and can go in an envelope, and guess what they are actually made in the US too!

.............cheers.......

[scooter333]

Cheers SJC

Your a star