| |
|
#1
15-07-2007, 12:49 AM
| |||
| |||
| What size Torx Hi, I am fititng drag bars tomorrow (the local stealer won't as they are not harley originals) and I need to know what size torx to use on the hand controls so I can get to Halfords and buy one? Hope you can help! Jase  |
|
#2
15-07-2007, 11:06 AM
| ||||
| ||||
| Re: What size Torx T25 & T27......on 2003 Road King Sorry for the late reply but we did not get in until 3.30am this morning...and me heed hurts.....LOL This thread may be of use re taking off your grips.....HERE Also THIS is good you may want to try it.... 
__________________ BaZa® Region 13 Central Sth Rep     Last edited by BaZa ®; 15-07-2007 at 04:39 PM. |
|
#3
15-07-2007, 02:39 PM
| |||
| |||
| Re: What size Torx Thanks, Another Forum told me T25 and T27, I bought both but only needed the T25! Getting the left hand grip off wasn't too hard, just a bit of washing up liquid and I just kept twisting it...took about 20 minutes! The bugger is the new bar won't tighten in the middle, it moves around! It is either a fraction smaller than the std one or its because it doesn't have the crimping! Any ideas on safe packing? Jase |
|
#4
15-07-2007, 04:32 PM
| ||||
| ||||
| Re: What size Torx Sorry for the duff T27 info this morning I was a bit jet lagged I only did the T27 but there is also on my Road King T25 as well. All about pegging handlebars. click on link. http://www.harley-davidson-hangout.c...andlebars.html
__________________ BaZa® Region 13 Central Sth Rep Last edited by BaZa ®; 15-07-2007 at 04:38 PM. |
|
#6
15-07-2007, 11:42 PM
| |||
| |||
| Re: What size Torx I cut up a jubilee clip and inserted 2 inchs of that into the wells, works great! Jase |
 |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
