How to set the clock on '07 on models

[Kitty]

How to set/adjust the time setting of the clock displayed on the Speedo of '07 on models.

Turn the ignition switch to ACC or Ignition.

Keep pressing the Speedo switch {the trip reset button} until the time is displayed.

Press and hold the switch until 12HR begins to flash in the display or Press again for 24HR.
Release the button.
{I believe not all Speedos display both 12 & 24 hours some only have 12 hours, mine does both!}

When the desired time style is displayed, press and hold the button for five seconds.

The display will change to the time with the hours flashing.

To advance the hours press the button until the correct hour is reached. Each press will move it on one.

Press and hold the button until the minutes start flashing.
To advance the minutes press the button repeatedly as above until the correct time is reached.

When the correct time is displayed, press and hold the button for 5 seconds, the minutes display should then stop flashing and the clock is set.

Turn the ignition switch to off

Kitty x