Trans cover

[Jonno.Big-Twin]

Hi all

I'm replacing all the cover fixings on my 08 Train with stainless bolts. The kit requires the outer trans cover to be removed to reach bolts on the trans it's self.

Having recently changed the trans fluid I'm looking not to have to drain the fluid again.

Could anyone guild me on any work around that people have used, sure I won't be the first to change out the bolts without dropping the oil, I gather I will need to lay the bike over further than the stand will allow?

Any help would be appreciated.

Thanks all.

Jon

[Tomo.T]

Drain the oil into a clean container and put to one side. Replace screws and drain plug, then re install the oil, using a small funnell, through the filler hole provided. Whats the problem ?

[Jonno.Big-Twin]

Yer, no problem. Just looking for the easiest way out.