![]() | |
|
#1
| ||||
| ||||
| tyre info
Hi, gonna put a Heritage wheel in the front of my train..need a low profile tyre..the tyre that seems right is a AVON AZARO..130.70.16..I don't know the width of a Heritage tyre..I know how to work out the wall size etc, but all I see is a figure that don't mean to much to me..any help appreciated
__________________ IF YOU TOUCH SOMETHING HOT FOR A SECOND IT SEEMS LIKE AN HOUR.. IF YOU TOUCH A HOT WOMAN FOR AN HOUR IT SEEMS LIKE A SECOND... time is relative |
|
#2
| ||||
| ||||
| Re: tyre info
Are you having the wheel re-spoked? The Heritage wheel is dished, but the Night train one isn't. You either need to get the wheel re-spoked, or you will need new axel spacers, and will also have to space out the brake caliper. What mudguard are you going to use? If you use a Fat Boy or Heritage, then 130/90 Venom will fit. You will also need spacers on this. If you are going to use a custom job, you may be able to use a 150. Using these tyre sizes, you won't have to lower the rear. Last edited by spinlondon; 01-11-2009 at 05:34 PM. |
|
#3
| ||||
| ||||
| Re: tyre info
Hi Spinlondon thanks for the info..the 130 bit was the info I was after. The set up so far is 18" x 200 back wheel, running a Mettzler 200,50 gotta stick with that wall size for road speed. lowered 2" front and rear. I don't like the 21" Measured the Heritage hub and the 21"hub identical width at 160mm,disc fits, axle etc. was expecting caliper/hub spacers etc. So I will get a Cobra on the rear, wrong wall size on a Venom, and a 70 wall tyre on the front, possibly the Azaro don't want a fat tyre. I worked out that the front end overall will drop between 3 and 4 inches..worry about the fender when the time comes. bit of a suck it an see thanks for the info
__________________ IF YOU TOUCH SOMETHING HOT FOR A SECOND IT SEEMS LIKE AN HOUR.. IF YOU TOUCH A HOT WOMAN FOR AN HOUR IT SEEMS LIKE A SECOND... time is relative |
|
#4
| ||||
| ||||
| Re: tyre info
Got the Azaro fitted..Spinlondon was right an I knew there would be a spacer issue..had to move the wheel n caliper over 5mm. Had some spacers just had to size them. Never had the material for the caliper spacers so I will make em next week at work. So made do with some washers..had to go for a ride..just to get the sticky label off only did 20 mls tho So spinlondon thanks for your help..get a Cobra for the rear next and a fender for the front So I'm lookin.....
__________________ IF YOU TOUCH SOMETHING HOT FOR A SECOND IT SEEMS LIKE AN HOUR.. IF YOU TOUCH A HOT WOMAN FOR AN HOUR IT SEEMS LIKE A SECOND... time is relative |
|
#5
| ||||
| ||||
| Re: tyre info
lookin good dave - how does it ride?
__________________ Patrick |
|
#6
| ||||
| ||||
| Re: tyre info
Definitely not as twitchy over shite roads Pat went out again today..til the rain started..don't mind gettin wet but can't scrub the tyre in, so a waste of time just gonna see how the mileage goes n how it compares with venoms and the 21" mettzler...Tyre works on Blackbirds,blades n'busa's soooo speed aint an issue
__________________ IF YOU TOUCH SOMETHING HOT FOR A SECOND IT SEEMS LIKE AN HOUR.. IF YOU TOUCH A HOT WOMAN FOR AN HOUR IT SEEMS LIKE A SECOND... time is relative |
![]() |
| Thread Tools | |
| Display Modes | |
| |